Paul, I called

Lynn Wesley
COPPERSTATE 2006 Forums Chairman
lwesley1@peoplepc.com <mailto:lwesley1@peoplepc.com>
520-883-8588 home
520-794-3013 work

about you giving a forum.    You can contact him or he will email you
tonight about the details.  He also mentioned that they will have
Workshops if you have the time and inclination.  The workshops need to
be scheduled by this weekend so that they can order tents.

If you need any assistance from this end (Tempe, AZ), I would be glad to
help.

Joel Mayhall
jmay2174@yahoo.com
480-201-5911 cell

Thanks Joel. I would be up for a two hour work shop if they can
schedule it no later than 9:00 AM. Gets way too hot out there
in the afternoon.

In the mean time see
if you can locate a junk 12A (water damage OK) that people
can take apart. Big hit at Sun & Fun. We will need a set
of metric tools and a broken free front e-shaft nut (first)
a well as a broken free flywheel nut (the big problem)
or no flywheel at all. Easier to load and unload.
An engine stand would also help.

Dave Lemon, do you have a scrap 12A we can have. I'll leave
it at Copper State with some one over there.
We can give you a plug "Engine courtesy of Mazdatrix."

Also Paul Yaw is in Phoenix as I recall.
http://www.yawpower.com/

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.