>> Are their any plans to market this prop ??? Looks teriffic !!
>> Charles N345B
>>
>> Perhaps if it works.
>> --
>> Paul Lamar ...No rotor no motor.
>
> hi Paul, been waiting for this prop for how long now? however i am
> confused, this is the first picture i have seen of the pitch
actuator. i am
> trying to understand how the solid T that is pinned to the blade
hub pin can
> change the pitch without binding up. it would need to be hinged
or have
> slotted holes in it. or is the pic missleading. thanks wyo walt.
>
> -----------------------------------------------
> It has slotted holes in it. They don't have to be very long as it
does
> not take much to change the pitch 20 degrees. 20 degrees is a lot
of pitch
> change.
>
> --
> Paul Lamar ...No rotor no motor.
>
Paul, Perry and Butch,
Very very impressive design. Nicely compact in hub to center of prop
axis as
well. Do you have drawings to share? I would like to make up a
three blade
hub and of course a three prong pitch change yoke.
Little Ants Eat Voraciously:)
DougFir
I'll have to check with Butch on that.
A three blade is doable.
--
Paul Lamar ...No rotor no motor.
Yes, I would like a 3-blade... you go Doug.