Subject: Need to borrow 2.17:1 gear box.
From: Rotary Engine
Date: 9/8/2006, 8:49 PM
To: AA-me


    >> Are their any plans to market this prop ??? Looks teriffic !!
    >> Charles N345B
    >>
    >> Perhaps if it works.
    >> --
    >> Paul Lamar ...No rotor no motor.
    >
    > hi Paul, been waiting for this prop for how long now?  however i am
    > confused, this is the first picture i have seen of the pitch
   actuator.  i am
    > trying to understand how the solid T that is pinned to the blade
   hub pin can
    > change the pitch without binding up. it would need to be hinged
   or have
    > slotted holes in it.  or is the pic missleading.  thanks wyo walt.
    >
    > -----------------------------------------------
    > It has slotted holes in it. They don't have to be very long as it
   does
    > not take much to change the pitch 20 degrees. 20 degrees is a lot
   of pitch
    > change.
    >
    > --
    > Paul Lamar ...No rotor no motor.
    >


   Paul, Perry and Butch,

   Very very impressive design. Nicely compact in hub to center of prop
   axis as
   well.  Do you have drawings to share? I would like to make up a
   three blade
   hub and of course a three prong pitch change yoke.

   Little Ants Eat Voraciously:)

   DougFir

   I'll have to check with Butch on that.
   A three blade is doable.

   --
   Paul Lamar ...No rotor no motor.


Yes, I would like a 3-blade...  you go Doug.

-- 
David Leonard

Turbo Rotary RV-6 N4VY
My websites at:
http://members.aol.com/_ht_a/rotaryroster/index.html
<http://members.aol.com/_ht_a/rotaryroster/index.html>
http://members.aol.com/_ht_a/vp4skydoc/index.html
http://leonardiniraq.blogspot.com


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.