paul
we flew the lancair a few weeks ago but only about
20ft off the runway. we are taking baby steps. we are
adding a second oil cooler. the water temps have not
been a problem.
i agree with you on the 300hp of the engine naturally
aspirated. we dynoed a engine set up the same and it
made 580hp and 386 ft/lb torque at 10 lbs boost. with
these numbers we tore the motor mounts up after 3-4
high speed passes.
should be ready to fly again in 2 weeks.
paul brannon N117ES
Congradulations on the first flight. What are you using for a prop
now? You should be able to do well at Reno in the Sportsman class.
Also set some city to city records and maybe a coast to coast
in some weight class with an aux fuel tank in the back seat.
Lots of twist on that motor mount. Good thing you busted the motor
mounts on the dyno and not in the air.
Got any pictures of anything you can send us.
Now we are getting to the point where people are forced to notice
the Mazda rotary aircraft engine.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.