Paul, I am finally back from Iraq and you can use my RD-1B, but only if
I get to be first on the list to buy a prop if everything checks out on
the engine stand. I do have the new Radiator to mount and the Starter
is the main clearance obstacle.
Don't forget that my spacers are a little unique, they will require the
additional space provided by that aluminum plate that you were going to
trim down for me on your new band saw (any luck with that by the way?
I am flying a cardinal to Mammoth the evening of Friday the 15th and can
drop it off in Santa Paula or Camarillo on my way up (or on the way back
on Sunday evening). Or you can come pick it up if you want. Or even
better, if Perry can wait until I get the Rad positioned (a couple of
months), then he can have it until I get closer to next flight (Spring
or Summer).
Whats this about a pusher configuration? Did you get a new plane or was
that Perry talking about his?
Dave Leonard
Turbo Rotary RV-6 N4VY
My websites at:
http://members.aol.com/_ht_a/rotaryroster/index.html
http://members.aol.com/_ht_a/vp4skydoc/index.html
http://leonardiniraq.blogspot.com
Dave, here is what your adpater plate looks like.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.