Does anyone have a copy of email a couple of weeks ago that
had mcmaster carr part #'s and so on that you could forward .

Thanks ,Geir

This is the method we use for attaching the 10-32 throttle
cable to the teflon. These are off the shelf 3/8th steel spacers
from McMaster Carr.
http://www.mcmaster.com/

McMaster Carr 3/4 inch OD  3/8th inch long 5/16th ID steel spacer part
number 92415A455 $3.32 well worth it. Page 3001 cat 108

Also buy the precision ground  blanks in Teflon. McMaster Carr
part number 9711K2 for 3/8 thick 4 inches wide and 12 inches long.
Expensive but well worth it. +-.005 Page  Page 3282
cat 108

Make subject folders guys and move stuff to folders.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.