Does anyone have a copy of email a couple of weeks ago that
had mcmaster carr part #'s and so on that you could forward .
Thanks ,Geir
> This is the method we use for attaching the 10-32 throttle
> cable to the Teflon. These are off the shelf 3/8th steel spacers
> from McMaster Carr.
>
http://www.mcmaster.com/
>
> McMaster Carr 3/4 inch OD 3/8th inch long 5/16th ID steel spacer part
> number 92415A455 $3.32 well worth it. Page 3001 cat 108
>
> Also buy the precision ground blanks in Teflon. McMaster Carr
> part number 9711K2 for 3/8 thick 4 inches wide and 12 inches long.
> Expensive but well worth it. +-.005 Page Page 3282
> cat 108
>
Make subject folders guys and move stuff to folders.
Paul Lamar ...No rotor no motor.
-------------------------------------------------------------
Paul,
McMaster On Line catalog is no longer listing the precision ground
Teflon, 3/8x4x12". Either 2x12 or 12x12", see below.
Joel
*Thickness *
*2" x 12" *
*12" x 12" *
*Thick. * *Tolerance * *Each * *Each *
1/4" ±.005"
9711K11
<javascript:TargetLink('TR2662','tr','PT26621','9711K11');> $17.52
9711K16
<javascript:TargetLink('TR2662','tr','PT26622','9711K16');> $102.12
3/8" ±.005"
9711K21
<javascript:TargetLink('TR2663','tr','PT26631','9711K21');> 26.30
9711K26
<javascript:TargetLink('TR2663','tr','PT26632','9711K26');> 151.12
1/2" ±.005"
9711K31
<javascript:TargetLink('TR2664','tr','PT26641','9711K31');> 35.06
9711K36
<javascript:TargetLink('TR2664','tr','PT26642','9711K36');> 208.33
--------------------------------------------------
Kind of garbled but it sounds like they did away with
all the old loose tolerance stuff and all you can order is
the =/- .005 stuff. Of course you can get over size stuff
and face it off in the mill.
I'll see if I can screen capture the page.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.