>> Hey Dave,
>>
>> Welcome back. I followed and enjoyed your blog while you were
>> stationed in
>> Iraq. We also sent you a care package of cookies and coffee but
it was
>> returned to us. I guess the Japanese postal markings looked
suspicious.
>> Anyway glad you are safe.
>>
>> A three blade for your RV. Hmmmm.... Wouldn't a two blade C/S be
>> more than
>> adequate?
>>
>> Doug Fir
>>
>>
>> BTW guys here are some of Butch's nice 3D's on the prop hub.
>>
>>
>> --
>> Paul Lamar ...No rotor no motor.
>>
>> The Rotary Engine NewsLetter. Powered by Linux.
>> ACRE NL web site.
http://www.rotaryeng.net
<http://www.rotaryeng.net/>
>> Copyright 1998-2006 All world wide rights reserved.
>>
>>
>>
>>
>> Thanks for the package Doug! Its the thought that counts.
>>
>> Yes, a 2-blade is adequate and the most efficient. However, I
have come
>> to note what I feel is a sort of harmonic between the engine and
prop.
>>
>> It works like this with a 2-blade prop and 2.17:1 gear drive:
>> Say there is a power stroke as a prop blade is passing 12:00
(call that
>> zero degrees). The next power stroke is going to occur after
165 deg.
>> of prop rotation. That puts the other prop blade 15 degrees behind
>> where the last power stroke occurred. And the next power stroke
15 deg
>> behind that. Give it 10 more power strokes and we will be about
where
>> we started. But since there are 2 blades the same phenomenon was
>> occurring 180 deg away and doubles the frequency.
>>
>> At 6000 engine RPM it all works out to a 16 Hz cycle that I
swear I am
>> hearing and feeling in the cockpit. It is noticeable by my
passengers
>> (and I think somewhat disconcerting), and my instrument panel
seems to
>> vibrate to this freq.
>>
>> I know that I am not the only one to notice it. If you go do
"the roll"
>> on Tracy's website, you can clearly hear the same ~16 Hz cycle
in the
>> background.
>>
>> With a 3 blade prop everything changes. Because of the lack of
opposing
>> prop blade the main cycle becomes 8hz and the apparent amplitude
will
>> drop in half. There will then be two additional half amplitude
nodes
>> causing distracting sounds 120 deg away.
>>
>> I think this will have the effect of increasing the freq of the
sound to
>> 24 Hz (making it less noticeable?) and decreasing its strength
by 1/2.
>>
>> Of course none of this makes any sense even to me, but maybe it is
>> responsible for the profound improvement in smoothness reported by
>> rotary guys who try out 3-bladed props on their planes.
>>
>> --
>> David Leonard
>
>
>
>
>> Turbo Rotary RV-6 N4VY
>> My websites at:
>>
http://members.aol.com/_ht_a/rotaryroster/index.html
>> <
http://members.aol.com/_ht_a/rotaryroster/index.html
<http://members.aol.com/_ht_a/rotaryroster/index.html>>
>>
http://members.aol.com/_ht_a/vp4skydoc/index.html
>> <
http://members.aol.com/_ht_a/vp4skydoc/index.html
<http://members.aol.com/_ht_a/vp4skydoc/index.html>>
>>
http://leonardiniraq.blogspot.com
<http://leonardiniraq.blogspot.com/>
>>
>
>
> Dave,
>
> Yes it does make sense. I believe I read somewhere Tracy
experienced a
> similar phenomena years ago with his first generation bird. I
thought the
> rubber donuts on the flex plate were suppose to take care of this
> torsional
> resonance problem though. Your prop is probably different than his in
> weight
> and pitch though. Sounds like a rubber donut hardness 'tuning'
challenge
> to me. Wouldn't a 2.83 gearbox be a better ratio for the HP
numbers you
> are
> generating? Of course you would still need another prop.
>
> BTW I have to have a three blade for my bird and I think I'll go
with a
> 3:1
> gear box. That would mean the prop is rotating at the same
speed as the
> rotors. Good, bad, ugly? I am prepared for trouble and hope it
shows up
> on
> the test stand and not in the air.
>
> Doug Fir
>
> One advantage of a integer ratio for a pusher is the prop
> can be clocked to miss the exhaust pulses.
>
> Paul Lamar
Doug,
I agree on the 2.85 - in addition someone suggested that the softer the
dampers were the better to soak-up the torsional vibrations in the 2
rotor.
It was however interesting to hear about that harmonic problem,
could lead
to something breaking.
George(down under)
This is not really a harmonic problem. and resonance was probably the
wrong term as well. It has nothing to do with engine-prop-gear
dampening. It is simply where the power pulse is occurring on each
revolution of the prop. On certified engines it occurs in the same
location every revolution of the prop, but here it migrates. It is not
dangerous or causing increased stress (in fact it is most probably
decreasing the stress on the critical drive train components). It is
just the fact that the power pulse is migrating. It is going to sound
different if it is coming from 12:00 vs 8:00. That cycle is repeating
so you happen to hear it. I am just thinking that a 3 blade prop might
make it less rhythmic so it is less noticeable.
Your 3:1 box will not have this issue. An engineer will have to discuss
if that will be harmful.
David Leonard
Turbo Rotary RV-6 N4VY
My websites at:
http://members.aol.com/_ht_a/rotaryroster/index.html
http://members.aol.com/_ht_a/vp4skydoc/index.html
http://leonardiniraq.blogspot.com
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.