>>> Thanks Jim. I think we are seeing that too. We have a few years
    >>> with Chevy V8 LS1 coils and they seem to be fine.
    >>> Actully Denso made in China :)
    >>>
    >>> Paul Lamar ...No rotor no motor.
    >>
    >>
    >> Paul,
    >>
    >> Thanks for your efforts, I will get the scope onto mine. The 11
   volts is
    >> a
    >> bit of a puzzle. I would have expected 14 volts. Maybe there is
   a ballast
    >> resistor. Do you have the circuit diagram?  How is ppm
   calculated from
    >> rpm?
    >> After reading Jim Mederer's email I am inclined to purchase a
   set of LSI
    >> coils.
    >>
    >> Ian Beadle
    >
    > Ian,
    > I would!
    > George (down under)


   George,
   Are the LS1 coilpacks available in Australia?  Do you know what is
   needed to
   drive them?  My emails to Tracy bounce for some unknown reason.
   Trevor with the Renesis Jabiru is sending me some noise measurements
   of his
   straight out exhaust no muffler. Should be interesting.

   Ian (also down under)


I believe the Monaro is in Australia, isn't it?  That's the Pontiac GTO
over here, and it has the latest generation of the small block chevy in
it (LS1/6/7).  Should be the same ignition coils as our engines over here.


Regards,

Matt-


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.