Thanks Jim. I think we are seeing that too. We have a few years
with Chevy V8 LS1 coils and they seem to be fine.
Actully Denso made in China :)

Paul Lamar ...No rotor no motor.

Paul,

Thanks for your efforts, I will get the scope onto mine. The 11 volts is a
bit of a puzzle. I would have expected 14 volts. Maybe there is a ballast
resistor. Do you have the circuit diagram?  How is ppm calculated from rpm?
After reading Jim Mederer's email I am inclined to purchase a set of LSI
coils.

Ian Beadle

Ian,
I would!
George (down under)

George,
Are the LS1 coilpacks available in Australia?  Do you know what is needed to
drive them?  My emails to Tracy bounce for some unknown reason.
Trevor with the Renesis Jabiru is sending me some noise measurements of his
straight out exhaust no muffler. Should be interesting.

Ian (also down under)

Ian I have designed my own straight-out exhaust in collaboration with Bill
Jepson.
Will fill you in later!
George ( down under)



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.