Hey Dave,
Welcome back. I followed and enjoyed your blog while you were
stationed in
Iraq. We also sent you a care package of cookies and coffee but
it was
returned to us. I guess the Japanese postal markings looked
suspicious.
Anyway glad you are safe.
A three blade for your RV. Hmmmm.... Wouldn't a two blade C/S be
more than
adequate?
Doug Fir
BTW guys here are some of Butch's nice 3D's on the prop hub.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
<http://www.rotaryeng.net/>
Copyright 1998-2006 All world wide rights reserved.
Thanks for the package Doug! Its the thought that counts.
Yes, a 2-blade is adequate and the most efficient. However, I
have come
to note what I feel is a sort of harmonic between the engine and
prop.
It works like this with a 2-blade prop and 2.17:1 gear drive:
Say there is a power stroke as a prop blade is passing 12:00
(call that
zero degrees). The next power stroke is going to occur after
165 deg.
of prop rotation. That puts the other prop blade 15 degrees behind
where the last power stroke occurred. And the next power stroke
15 deg
behind that. Give it 10 more power strokes and we will be about
where
we started. But since there are 2 blades the same phenomenon was
occurring 180 deg away and doubles the frequency.
At 6000 engine RPM it all works out to a 16 Hz cycle that I
swear I am
hearing and feeling in the cockpit. It is noticeable by my
passengers
(and I think somewhat disconcerting), and my instrument panel
seems to
vibrate to this freq.
I know that I am not the only one to notice it. If you go do
"the roll"
on Tracy's website, you can clearly hear the same ~16 Hz cycle
in the
background.
With a 3 blade prop everything changes. Because of the lack of
opposing
prop blade the main cycle becomes 8hz and the apparent amplitude
will
drop in half. There will then be two additional half amplitude
nodes
causing distracting sounds 120 deg away.
I think this will have the effect of increasing the freq of the
sound to
24 Hz (making it less noticeable?) and decreasing its strength
by 1/2.
Of course none of this makes any sense even to me, but maybe it is
responsible for the profound improvement in smoothness reported by
rotary guys who try out 3-bladed props on their planes.
--
David Leonard
Turbo Rotary RV-6 N4VY
My websites at:
http://members.aol.com/_ht_a/rotaryroster/index.html
<http://members.aol.com/_ht_a/rotaryroster/index.html
<http://members.aol.com/_ht_a/rotaryroster/index.html>>
http://members.aol.com/_ht_a/vp4skydoc/index.html
<http://members.aol.com/_ht_a/vp4skydoc/index.html
<http://members.aol.com/_ht_a/vp4skydoc/index.html>>
http://leonardiniraq.blogspot.com
<http://leonardiniraq.blogspot.com/>
Dave,
Yes it does make sense. I believe I read somewhere Tracy
experienced a
similar phenomena years ago with his first generation bird. I
thought the
rubber donuts on the flex plate were suppose to take care of this
torsional
resonance problem though. Your prop is probably different than his in
weight
and pitch though. Sounds like a rubber donut hardness 'tuning'
challenge
to me. Wouldn't a 2.83 gearbox be a better ratio for the HP
numbers you
are
generating? Of course you would still need another prop.
BTW I have to have a three blade for my bird and I think I'll go
with a
3:1
gear box. That would mean the prop is rotating at the same
speed as the
rotors. Good, bad, ugly? I am prepared for trouble and hope it
shows up
on
the test stand and not in the air.
Doug Fir
One advantage of a integer ratio for a pusher is the prop
can be clocked to miss the exhaust pulses.
Paul Lamar
Doug,
I agree on the 2.85 - in addition someone suggested that the softer the
dampers were the better to soak-up the torsional vibrations in the 2
rotor.
It was however interesting to hear about that harmonic problem,
could lead
to something breaking.
George(down under)
This is not really a harmonic problem. and resonance was probably the
wrong term as well. It has nothing to do with engine-prop-gear
dampening. It is simply where the power pulse is occurring on each
revolution of the prop. On certified engines it occurs in the same
location every revolution of the prop, but here it migrates. It is not
dangerous or causing increased stress (in fact it is most probably
decreasing the stress on the critical drive train components). It is
just the fact that the power pulse is migrating. It is going to sound
different if it is coming from 12:00 vs 8:00. That cycle is repeating
so you happen to hear it. I am just thinking that a 3 blade prop might
make it less rhythmic so it is less noticeable.
Your 3:1 box will not have this issue. An engineer will have to discuss
if that will be harmful.
David Leonard
Turbo Rotary RV-6 N4VY
My websites at:
http://members.aol.com/_ht_a/rotaryroster/index.html
http://members.aol.com/_ht_a/vp4skydoc/index.html
http://leonardiniraq.blogspot.com
Dave,
You got a good ear. Are you a musician? You probably don't like rap music?
either:) The president of my company, (he was the inventor of surround
sound) can also hear and identify high frequency shifts. He comes from a
family saturated with famous talented musicians.
Yes I have heard pros and cons on the 3:1 ratio PSRU. It really depends on
the combination and type of prop. motor mounts etc. Carbon fiber for sure
and well balanced prop. Turbo compounding could be its undoing as we
really don't know what increases in torque at certain manifold settings will
do. BTW Dave Garber has had no problem with his Bell 47 - 3:1 ratio drive.
The only problem I have with the unit is the price. You can buy a RV-10 kit
for less:)
Paul, Ken's unit with the Dodge set will be more than 3:1
Doug.
Dave's units are around 2.4:1,
Yes but I think Ken made some belt PSRU's 3:1's.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.