This is no big thing but it is a good idea
to use Swivel nut bent tube fittings instead of sharp
right angle fittings. It reduces oil pressure drop, reduces HP
requirements in the oil pump and some heat build up in the oil
supply. Some claim as much as 20 degrees F improvement in the 13B
per sharp right angle fitting. Not a show stopper however.


http://www.discounthydraulichose.com/category_s/21.htm&click=2?gclid=CNXBxvO-rIcCFQbmYAodb28K7A--

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.