TWM induction has throttle bodies with two injector pockets each for
the rotary.  48/50/55 mm available.  They did not have a photo but
something like this off the shelf needs checking out.  I gather it is
a new product.      Jerry

http://www.twminduction.com/ThrottleBody/ThrottleBody-FR.html

I don't see any Mazda rotaries in there. I see Miata. What they
do show is too short for our purpose.

--
Paul Lamar ...No rotor no motor.

Go to the 2900 series throttle bodies.  These are the direct
replacements for the old Weber DCOE.  On top of that page is a link
to an article for carbs vs, injection.  It seems to be a good dyno
article for tuning a 13B.  It also shows a good picture of the two
piece manifold with the 2900 bolted up.
http://www.twminduction.com/ThrottleBody/carb_vs_fi.pdf

Mike
Mike McGee, RV-4 N996RV, O320-E2G, Hillsboro, OR
13B in gestation mode, RD-1C, EC-2

Very interesting article.

Doc Custer
Retired software engineer and sometime Audiologist
Building RV9-A. Fuselage

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.