>>> The mill will be ready in two weeks.. :-) Thats what I've been
>>> saying since
>>> I started it anyway... In reality its going to be a little
while
>>> yet. I've
>>> been working on it since the first of march. It's a bit tough
to
>>> set any
>>> real date as its the 'issues' you find that make it long or
>>> short. Working
>>> through them takes time. It is a monster.. the working
envelop
>>> is 18 x 8.5
>>> x 4 all in feet, hence the time to get it all up to speed is
a
>>> bit longer
>>> than normal. I didn't get to work on it much this summer so
that has
>>> dragged it out as well.
>>>
>>> In the mean time I'll have to start a list of Makes and models
>>> which people
>>> want, and then make some CAD models to make them all work.
I've
>>> done some
>>> Rv10 cowl models in the past when the smily type opening was
>>> thought to be
>>> the optimum. W/ this new style it will take a 1 or 2 tweaks to
>>> get it just
>>> 'so' but it shouldn't be a problem. Attached are some of the
>>> pic's of the
>>> old style cowl..
>>>
>>> Jarrett
>>
>> Remember that the S-beam has been moved down and back. It is
30.5>> inches wide and takes the first 3 inches of the pan flange.
Where
>> are you located, Jarrett? Jerry
>
> Yes, those pictures are a bit dated. I haven't taken the time to
go
> back
> through
> the model and make updates to the current standards. It's just
> never been
> much of a priority since I did them [at least until now :-) ]
>
> I'm located about 30 miles north and 25 miles east of the Border
> junction
> of ND,MT and Canada.
>
> Jarrett
> [Weyburn,Sask,Canada]
Damm, That is a long way away from NE Indiana. Jerry
It's a little ways if your hitch hiking.. but not on the opposite side
of the world. I live in a province which does a very large part of
North America's agricultural equipment exporting. In my current
day job we ship all over the world so.. anywhere in N.America is
what I'd call my 'Back yard' :-).
Jarrett
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.