Subject: Designing rear motor mounts for sheet metal firewalls.
From: Rotary Engine
Date: 9/26/2006, 10:53 AM
To: AA-me




Jerry, What you are looking for is a significant stiffener
oriented horizontally across the back or front of the sheet
metal firewall.

For example here is a back view of an RV9A. With an RV9A
the rear motor mount strut lower ball joint would be mounted
on the nose gear socket. No problem. Great location.

An RV9 would be similar but there would be no nose gear socket.
However they both have a box that extends back into the cockpit
area. Very typical of Van's designs. The lower joint of that box
is where you want to locate a bracket that accepts the upper ball
joint of the rear motor mount strut. It is a very strong area
of the firewall.

Here is a marked up dwg. The stiffener part number is F-601E-1
Drill out the two center rivets and replace with two 10-32 machine
screws and rivet the rest of the .035 4130 sheet metal channel
bracket all the way down to the bottom of the firewall. That
distributes the load into a large area of the sheet metal
firewall.


Where the
1/2 inch dia. bolt goes through the bracket, weld washers on both
sides of the one inch wide .035 thick 4130 bracket. You can use
two bent up angles instead if you wish.

The half inch dia.  bolt of course is way way over kill but
unfortunately that is because of the 1/2 inch dia. hole in the
rubber ball joint. The ball joint rating is 270 pounds and a
half inch dia. straddle mounted cheap bolt will accept tons.
You could drill a 1/4 hole in the center of the bolt if you
wanted to save a few ounces.

The load here will never exceed about 50 pounds static.

Have customers send me a picture of their firewalls front and
back  so I can pick out a location if you wish.
-- 
Paul Lamar ...No rotor no motor.

Doesn't McMaster have a sleeve 1/2 OD / 1/2 ID so you could use a 1/4" bolt
instead. Heck it would be simple to turn some up in aluminum on a lathe.
(maybe a little weight anal)

John

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.