I found data on the GM coil pack wiring. There are 7 wires in the
harness three of them are common to all coils the other four are the
respective trigger signal wires. The color code is as follows:
Pink-Coil Positive, +12v
Black-Common Ground
Brown-Signal Reference Low
Purple, lt Blue, Green, Red-respective coil trigger signals
At each coil the pin numbers are:
Pin 1- Coil Positive
Pin 4- ground
Pin 2- Trigger signal
Pin 3- Signal low reference
Aubrey
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.