This is for those people that want to save a couple hundred
on a custom oil pan and use a stock oil pan. This is near
identical to the way the Questair bed mount is done for the
air cooled Cont. IO-550 AC engine. This bolt pattern is for an
RX8 engine but the same idea is used for a 2nd gen or 3rd gen
engine.
What does everybody think of this? In particular what
do you think Jerry? Does it add so much to the cost that
a custom aluminum oil pan is still worth while?
Paul Lamar ...No rotor no motor.
We would have to have the short box section at the rear folded and
probably the sides two. As you know, we will be talking about 50
pieces of each for a minimum order. The initial investment is
large. With those pieces on hand, it would probably cost a similar
price to building the custom pan. I do like the greater capacity and
aerodynamic shape of the pan. Those are important advantages. If
someone wanted to do a dry sump, this would work great. You have not
heard my pricing on the COMPLETE engine mount/pan/rear strut
package but I think everybody is going to be pleased. I will have a
figure in a couple of days. Jerry
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.