Subject: Newbie and the mounts/rads questions........
From: Rotary Engine
Date: 10/1/2006, 1:20 PM
To: AA-me



If anyone would like to give me some mental assist on the engine
mount/rad layout(Lord knows I need it....LOL), here is an ancient image
of the aft bulkhead of my ship uponst which I must install the pusher
engine/psru/prop and essentials. The bulkhead is approx 31" across at
each of the farthest points and is 3/4" birch ply strengthened now by a
T6 aluminum plate. The psru, a custom 3:1 belt-reduction is bolted
directly to the bell housing pattern of my NA 13B PPort, but naturally

Tim tracy


You sure you are not related to Luke Skywalker Tim? This sure looks like an
X wing!

Mark W



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.