Yes, folks...it's a....ssssshhhhhhh........."yu-kno-what." I've flown
rockets of her, R/C's of her, gliders of her and simmed her in X-Plane
for better than 500hrs. Absolute tight-arse CG, tandem gear with
outriggers, drag rudders and symmetrical foils...true....but she flies,
and that's all that matters to me. Kin to the Luke, nope.
Now, about those hints for the rads, water pump, oil pump, ect......LOL!
Oh, ya'll wanna couple of sim pics? Here ya go.
Ooops, looks like I threw in a 'brakes' pic, too....oh, well. When the
inspector OK's my cabling, and I skin her wings, then I'll show her
off...please be patient as I am shy about my work at this stage of the
build. Thanks!
Tim Tracy
Don't you need a canard up there on the nose somewhere?
Where is the air intake for the rad?
Paul Lamar ...No rotor no motor.
It is possible to have a flying wing with the right airfoil. Jim
Marske's glider designs fly extremely well.
http://www.continuo.com/marske/pioneer.htm
http://www.marskeaircraft.com/index.html
Are you using something like the public domain Roncz-Marske low pitching
moment airfoil?
The long nose would be destabilizing, even a small canard would probably
go a long way toward widening the CG...
Cheers
Cary
The Marske due to the straight leading edge and highly tapered
plan form has a fair moment arm for the elevators.
It also has vertical stabilizer and rudder with a fair moment
arm.
Paul Lamar
Well, with all that subscale testing you've obviously thought this out, but
I'll be interested to hear about the crosswind landing technique you'll
employ. Wing low is out, landing in a crab would work with mains and nose
gear stearable to runway heading (e.g. B-52), but with a lot of complexity.
This is experimental with a big E. Certainly not another cookie-cutter kit.
Mark
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.