Pual here we go!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Tony,
        Hello again. Would need to see your moulds first to know how much, and some more info if possible, how thick you want it, or I could figure it out probably if you like. Also, what is the buck made of, is it solid, etc. If you order ten, the mould price can be lowered, but initally I will ask more as most times the mould and one part is all that is ever made, so I have to price accordingly. I am out of town until wednesday night, you could call me on my cell phone at night at 317 590 2126 if you need to. Thanks.
                                        David Algie
                                        Algie Composite Aircraft
                               http://members.iquest.net/~aca/
                               http://groups.yahoo.com/group/algiecompositeaircraft/

> Algie
> you and I talked at Oshkosh last year. I was wondering if you could suck > down some carbon on a bellhousing mold for me? I don't know what you would > charge but I plan on selling these to the rotory engine guys. I might be > able to get an order for about ten or so. Can you give me a qoute on that > please, if you are interested?  They would need to be done with high temp > epoxy which I will supply for you and a couple of steel standoffs so as > not to crush the carbon when it is mounted to the motor.
>
> thanks Tony

OK Tony. I am working on a design as we speak.

I'll have it done in a few hours.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.