Subject: Honda composite gear box
From: Rotary Engine
Date: 10/9/2006, 3:53 AM
To: AA-me


   This is very similar to what we are trying to do with
   a carbon composite bell housings and motor mount combo.
   The wall thicknesses are also similar to what I suggested
   for the bell housings.

   Note the 30 to 35 gear box consumption in a season
   comment. So typical of professional car racing.

   Paul Lamar ...No rotor no motor.

This is interesting Paul,
The fact that the modern F1 car mounts nearly everything to the
gearbox, wing, suspension, side tunnels (at the rear), must really take
a toll on the regular box! Since I have worked with carbon and in the
semiconductor coating world, I got to see a very interesting toughened
carbon tow. The fiber is vacuum evaporation coated with titanium and
other metals. The resultant fiber has much better heat dissipation
capability. It was also being discussed as a surface skin for larger
aircraft as a improvement in static dissipation, without delamination as
it is more conductive than a carbon resin matrix by itself. Shows some
lightening strike potential. Of course it is verrrrrrrrrrry expensive!
Bill Jepson


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.