This is a very interesting idea although I don't really
see the benefit over a larger Wankel turbo compound engine.
The gas turbine part will have lousy fuel consumption.
Valve 1 controls the boost on the Wankel as well as
the amount of boost air going to the gas turbine.
When the valve is closed all boost air goes to the Wankel.
When the valve is wide open some boost air still goes to the
Wankel and some goes to the turbine. As more compressed air
is devoted to the gas turbine less compressed air is going
to the Wankel.
As the device starts to work as a gas turbine back pressure
is generated on the Wankel exhaust ports further reducing the
power of the Wankel.
I would very much surprised if this thing worked worth a
tinkers damn :)
I could be wrong. Maybe I am missing something.
Paul Lamar ...No rotor no motor.
Looks to me like someone has been reading about history... Wasn't it
a Mr. Wittle from England who did this very thing during the second
world war, to prove that a Gas Turbine engine would work..
He later removed the recip engine all together and just used
the Gas turbine..
Going from memory here..
Jarrett
A WW2 veteran aircraft mechanic told me that some of the warbirds in
War 2 used turbo compounding. Said it was a real bear to maintain. I
don't know if his idea of turbo compounding is the same as that being
discussed, but it sounded like it. He said the exhaust was used to
drive a turbine which in turn was coupled to the output shaft. If this
be true, I can see why the maintenance would be high: the turbine
alloys and lubricants available in the early to mid 40s were not
anywhere what they are today.
Doc Custer
Retired software engineer and sometime Audiologist
Building RV9-A. Fuselage
Actually it was very successful and thousands of engines
were built. Mostly for airliners after the war.
See
http://www.rotaryeng.net/turbo.html
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.