Subject: Long Ez/ Rhino pics
From: Rotary Engine
Date: 10/11/2006, 8:02 PM
To: AA-me


> > > Paul
> > > > > > I've been messing with Rhino. The scoop is what I have in mind to
> > > house my radiators and oil cooler. I plan on putting an augmenter
> > > in there somewhere. Can you give me an idea of the optimum scoop
> > > layout in other words is this one going to work? I want to use
> > > the two radiators forming a wedge like a greater than sign
> > > I know the drawing is a little rough. I don't have a full grasp
> > > on Rhino yet still importing parts from Auto Cad.
> > > > > > Tony
> > > > > > You are getting pretty good with Rhino Tony.
> > > That scoop will work fine. Where is the air coming out after
> > > it passes through the rads? At least as important as
> > > how it gets in.
> > > > > > > Paul
> > > > the idea is to have the augmenter in the scoop so the exit to the
> > air is going to be just under the prop flange. think of it like
> > a turboprop facing backwards only instead of intake air it will
> > be exhaust gas pulling air thru the front of the scoop thru a
> > duct between the tires and then out the back of the airplane.
> > the only thing is I'm not sure exactly how an augmenter works.
> > I mean I know what it does but the shape eludes me. Kinda of
> > a Brunelli thing right? I'm sure you can help me with that.
> > > > Tony
> > > > What are the dimensions of the duct between the tires?
> > > > If you have a side view in Rhino put some dimensions
> > on it and turn on dimensions in the rendering program,
> > render it and up load it to us. Same for a top view.
> > That way we can check scale and figure other dimensions.
> > > > -- > > Paul Lamar ...No rotor no motor.
> > > > Does not look like you have a whole heck of a lot of
> > room to get much air past that landing gear.
> > > > Paul Lamar ...No rotor no motor.
> > paul
> > That is an old Pic with the Cessna 210 gear on the bottom of the
> fuse, that was for concept only. I've designed my own retracts
> for the airplane. I'll do the dimensions for you when I get home
> from work today.
> > I think off the top of my head the fuse is around 24"in wide
> where the rads are going to go.
> > Tony
> > Tony are you a mechanical engineer? I have some friends
> that are talented mechanical engineers and they screwed
> up on the Nemesis Nxt gear design :) Several have crashed
> so far. Supposedly they had help from the Lockheed Martin
> Skunk works. Obviously it is not easy to design a good retract.
> > Paul Lamar ...No rotor no motor.
> >Paul
No I'm not a mechanical engineer in the traditional sense of the
word. which I'm kinda glad because I'm not bound by the rules of
engineering not that I don't pay attention to those rules but, I
too have several friends that are engineers that seem to be stuck
in the "engineering box" often times I will get e-mails about some
design they are working on and they'll ask what I think . I make a
few chnages here and there just to throw something new at them and
9 out of 10 it's " why didn't I think of that"? Are these nemisis
crashing due to gear failure? and what part of the gear is failing?

I have to say that most gear today have to many moving parts.
As far as I can tell   (this may be a bit bold given the company
I'm in)  my gear can not fail for any reason (other than a crash)
  the default is the down and locked position with one moving part.

  I just got the trunions back form the waterjet. Now, they are off
to the CNC shop to remove material to make them lighter. I also
have a steerable nose gear for the Long EZ  (that 's really cool),
that trunion is now done. I don't know if I can help the Nemesis
guys or even if they want my help. I love landing gear.I'm
obsessed withe them. I have been studying landing gear for 15yrs
now. If you don't allready have it, go get the book  LANDING GEAR
DESIGN FOR LIGHT AIRCRAFT by Ladislao Pazmany it has every formula
for calculating deflection, stress, turn over angles, dampning,
etc. etc. There are things in that book that you would never even
consider when making a landing gear.

BTW  I hired an egineering firm to look at my gear and check my
math and do a mild FEA study. Mild in the sense that the gear
legs are the grove aluminum legs which already are proven they
just bolt into the trunion. So far, the engineer I'm working with
loves them.

Tony

Everybody is bound by the rules of engineering (Physics). They are
not just a good idea..... they are the law. Your life depends on
them.

Paul Lamar

I knew you where going to come back with something like that!
Of course Paul I'm not saying I'm boundless to the rules of
physics or any other engineering disciplines. I just think out of
the box  a bit, then I worry about the engineering aspects of a
design. I get a design the way I want it then I figure out how
to make it work with math. I'm not saying all engineers, but the
ones I've known so far seem to engineer to a design instead of
designing first then engineering .  I'm sure I'm backwards but
that is how I do things and that seem to work out pretty well
for me. I'm not trying to insult anyone in the profession. I
appreciate all the help I get from all my engineering friends.
Believe me! I don't pretend for a second I know anything about
engineering. I (TLAR) first, then ask questions later. Why do you
think I hired an engineering firm to check my design? I know
you read that part, right?

Tony

Well Tony, you just send mixed messages.
So where are the wheels now when retracted?

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.