Subject: P-port butterflies
From: Rotary Engine
Date: 10/11/2006, 7:32 PM
To: AA-me


All  you guys concerned with the slide throttle position
as a function of HP generated make the hole in the Teflon
tear drop shaped. Don't make it round. I'll do a drawing for
you shortly. You can have your cake and eat it too.
-- 
Paul Lamar ...No rotor no motor.
Hi Paul,

Please explain the teardrop slide.  All I can see is turbulence at WOT
as the charge rushes by the edge of the teardrop.
How is this better than a lens shaped orifice at idle setting with the
plain circular hole.
BR, Dave McC

Well the slide almost never stays in that position for long.
Perhaps for awhile on approach. In that case you don't really
care about the turbulence. But the rate of opening area, as
a function of throttle cable position, is lower so it is
a bit easier to set a specific engine RPM.

You get turbulence past the butterfly all of the time.
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.