Subject: 13B with peripheral port, turbo, direct injection stratified charge
From: Rotary Engine
Date: 10/12/2006, 3:02 PM
To: AA-me


Mr. Lamar,

I came across your excellent web site this morning while searching for
info on Max Bentele (from Curtiss Wright).

I was thinking about adding stratified charge direct injection to
a peripheral port Mazda 13B engine along with a small turbo to  flush the
exhaust gas out before it gets a chance to mix with the incoming  air charge.

Various stratified charge Wankels were tested at Curtiss Wright in  the 60s.

The main engineer was Max Bentele who, sorrowfully, passed away this
year at the age of 94.

I see you have a positive interest regarding stratified charge
with Wankel engines.  Why do you think it was never used on any of the
Wankel engines available commercially ?

If you would be kind enough to send my your phone number, and good  time
to call, I would surely appreciate the opportunity to speak with  you for
a few minutes on this subject.

Sincerely,

Bruce Toski

Mazda Certifications
Master ASE Certification
Former Auto Vo-Tech instructor

1972 Audi 100LS and 1986 Audi 5000
1974 Mazda REPU (Rotary Engine PickUp truck)

(Former owner of R100, RX-3, RX-2, RX-4, Cosmo, NSU RO80 engine, Sachs
Wankel chainsaw, Sach Motocross prototype motorcycle, Graupner radio
control airplane engine,84 RX-7 SE, Hercules W2000 Wankel motorcycle,
Suzuki RE-5 Wankel motorcycle)



Do you have a museum Bruce? You should have. There is one
like that near Hockenheim Germany.

IMHO it is near impossible to see what is going on in
there in 3D. Tracy Crook thinks the engine is naturally
stratified charged due to the centrifugal effect on the
mixture. The best RPI could do after trying
everything CW, JD and RPI tried was .47 BSFC. About what we
are seeing and Mazda achieved in the Lemans engine.

The best you can do is come up with a new idea and try it.
-- 
Paul Lamar ...No rotor no motor.

---------------------------------------------------------------------- --

Mr. Lamar,
Thanks for the quick response.
I wish I had the time and money to go to Germany a few years ago ? for
the celebration of Mr. Wankel's life.
I also wish that I had the guts to try and call Mr. Bentele earlier
before he passed away .... to thank him for all the work he did to
advance Wankel technology.

Did you ever get a chance to speak with him or Mr. Wankel himself ?!

Sorry, not sure what RPI stands for ....

I was thinking about trying to find a high pressure injector that  would
screw into the 13B trailing hole sans any modification .... to  inject a
pulse of gas or hydrogen into the combustion recess soon after the
leading apex seal passes by.  With a small turbo pressurizing the
peripheral port intake ( on a race motor that I just picked up  cheap for
$600) during low rpm .... I am hoping to make a streetable PP engine
that is economical at the same time.  Sounds like a challenge non ?

I am probably not up to the task but ... we shall see ....

I like your idea of using exhaust energy to help turn the eccentric
shaft.  Do you have any products available for sale to help do this
economically with a 13B .... ???

[:-)

Bruce Toski

I think Kenichi Yamamota advanced the rotary more than any other
man with the possible exception of Felix himself.
Max never had anything go into production.

RPI is rotary Power International and they took over where
John Deere left off.

Never spoke to Felix, Max or Kenichi however I tried
when I was in Hiroshima. John Dinkel (jd) on here did talk
to Kenichi. Kenichi is still alive as of last year.

I am not in biz thank God. Sold a few intake manifolds awhile
back.

Paul Lamar ...No rotor no motor.


Paul,
This may be the museum you are referencing:

http://www.zweirad-museum.de  ("two wheeler museum...")

Its in Nekarsulm, where Audi's largest plant is.  45 Km North of
Stuttgart-  20 minutes South of Hockenheim. And its a fabulous
museum, one of the best I've ever seen.  And being Felix Wankel's
hometown makes it apropos.
Its also the home of our shop in Germany. Any visitors to the area
are welcome to tour. We make carbon parts there as well as the race
cars for LeMans et al.

Callaway Competition GmbH
Liebigstrasse 31
Leingarten, Germany

-Reeves

No but it is near there. The town is Altlussheim
Haupstrasse 154. Adjacent to Hockenheim. About a half
mile south on the same main road.

www.autovision-tradition.de

One of the rotary engineers working at Diamond Aircraft in
Wiener Neustadt told me about it.

How many places in the world can you see a Mercedes 3 rotor? :)

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.