Mr. Lamar,
I came across your excellent web site this morning while searching for
info on Max Bentele (from Curtiss Wright).
I was thinking about adding stratified charge direct injection to
a peripheral port Mazda 13B engine along with a small turbo to flush the
exhaust gas out before it gets a chance to mix with the incoming air
charge.
Various stratified charge Wankels were tested at Curtiss Wright in the
60s.
The main engineer was Max Bentele who, sorrowfully, passed away this
year at the age of 94.
I see you have a positive interest regarding stratified charge
with Wankel engines. Why do you think it was never used on any of the
Wankel engines available commercially ?
If you would be kind enough to send my your phone number, and good time
to call, I would surely appreciate the opportunity to speak with you for
a few minutes on this subject.
Sincerely,
Bruce Toski
Mazda Certifications
Master ASE Certification
Former Auto Vo-Tech instructor
1972 Audi 100LS and 1986 Audi 5000
1974 Mazda REPU (Rotary Engine PickUp truck)
(Former owner of R100, RX-3, RX-2, RX-4, Cosmo, NSU RO80 engine, Sachs
Wankel chainsaw, Sach Motocross prototype motorcycle, Graupner radio
control airplane engine,84 RX-7 SE, Hercules W2000 Wankel motorcycle,
Suzuki RE-5 Wankel motorcycle)
Do you have a museum Bruce? You should have. There is one
like that near Hockenheim Germany.
IMHO it is near impossible to see what is going on in
there in 3D. Tracy Crook thinks the engine is naturally
stratified charged due to the centrifugal effect on the
mixture. The best RPI could do after trying
everything CW, JD and RPI tried was .47 BSFC. About what we
are seeing and Mazda achieved in the Lemans engine.
The best you can do is come up with a new idea and try it.
--
Paul Lamar ...No rotor no motor.
Bruce,
Am I hearing you right " Direct Injection"?
This will require some high pressure air to atomize the fuel at the point of
injection - do you have a preferred Injector placement position?
Stratified charge as Paul mentions, seems to happen naturally.
As the exhaust escapes at supersonic speed beyond idle, The exhaust doesn't
need any additional help in fact if the inlet charge isn't delayed it will
actually suck in some charge as it self evacuates - apparently some
additional air sucked in to the exhaust is beneficial. This has been
confirmed by some German information Paul has on the Rotary.
Can you elaborate on what you have in mind.
George ( down under)
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.