Subject: Test club, was Re: Building a dyno
From: Rotary Engine
Date: 10/12/2006, 11:21 PM
To: AA-me


Here are couple of links to beautifully home made dynos for model
racing engines (he is getting about 25HP).

http://gallery.intlwaters.com/thumbnails.php?album=338
http://gallery.intlwaters.com/thumbnails.php?album=351

Mark W


Mark,

Very nice pictures.  If we applied the same idea to a 300 Hp engine mounted
with cowl within a cylindrical wind tunnel collector, then if I understand
the idea correctly we could change the loading of the engine by relieving
pressure on the fan.  In the RC engine dyno that appears to be done via
exhaust vents around the perimeter of the remote fan housing.

However for testing the aerodynamics of our cowlings and cooling
efficiencies we would want to direct the fan air through an air tunnel
collector.

Would choking the intake accomplish our goal? If so, the smaller the opening
to the fan the less load would be placed on the engine and result in greater
rpms, conversely if the intake was unrestricted  we could apply the maximum
design load to the engine and consequently a larger volume of air would be
sent through the collector tunnel.


If the fan size is about 72" in diameter and the collector cylinder is
around 48"  and the average size aircraft cowls and appendages  are within a
40" circle then we have about 4" of clearance to the walls at the narrowest
point. Enough?

Air velocities could be controlled by exhausting air before the collector.



Doug Fir


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.