Should have had the last pic( cocktail napkin version) at the beginning
showing progression of ideas but you get the picture.

 Rough draft using 3000 series 55mm TB from TWM.

Geir

You need to draw all that out to scale. You might
run out of room. According to the web site the TB is
3.46 inches high and a bore spacing of 4.72 inches.

I'll do a quick 3D

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.