Subject: p-port butterflies
From: Rotary Engine
Date: 10/13/2006, 5:54 AM
To: AA-me


What everybody needs to do with these experimental engines
is learn how to side slip. One of the airline pilots at SZP
was dragging his new Berkut in on the second flight
at 3 degrees like one would land an airliner. Engine quit... had
to set it down on the freeway slicing off the top of a Honda in
the process. People were hurt but not killed.

If you side slip and your engine dies on approach no problem.
You can still land. Also if you side slip it is easier to
put it down on the numbers as the decent angle is much greater
than 3 degrees. You can almost point the wing at the spot
you want to touch down. Altitude is always your friend.

Unfortunately the FAA took this out of the pilot training
curriculum.
-- 
Paul Lamar ...No rotor no motor.


Paul,
If I remember correctly I was told on a test that side slip on
final was a NO! No!
I think this was to eliminate the problem of some pilots getting
"out of shape" on final.
George (down under)

If you can't learn to side slip you have no biz being a pilot IMHO.
There are some instructor and check pilots that don't like it but
they have no biz being an instructor or check pilot despite what
the FAA says.

Side slips can save your life big time in an engine out situation.
It is about the only way to land a Pitts and still see the runway.
Same for a solo Cub.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.