Subject: M400X Skycar VTOL Prototype Aircraft with rotary engines
From: Rotary Engine
Date: 10/16/2006, 6:53 PM
To: AA-me


>
> You don't know him like I know him.
> Not that difficult of a problem. Almost off the shelf
> auto pilots would work. If he was serious it would have
> flown 20 years ago. There is no such FAA requirements of tethers
> on experimental aircraft in the US. Check out the very similar
> X prize.
>
> http://www.xprizecup.com/#
> http://www.xprize.org/
>
> The pdf is too big to publish. I won't give him the PR anyway.
>
> --
> Paul Lamar ...No rotor no motor.

Scam or not Gordon I don't see how this is going to revolutionize flying. By
their own claims they have a machine so woefully under powered that the risk
of failure of one of eight engines, even in ground effect, does not warrant
the risking of a test pilots life.

The FAA is not holding them up, they claim that the FAA rules do not apply
to them as they are tethered.

Once certified who could afford to buy one let alone maintain one ? Eight
certified engines to buy and maintain regularly. What aircraft engineer is
going to want to work on them with all their unique engines and systems (try
finding a guy for a certified Rotax). It would be cheaper to have a turbine
helicopter.

They forecast 6000' per minute climb rates and 400 mph cruise speeds, cool
but  those are huge numbers that no one else can match and again who could
afford the fuel for that ?

I really don't see how this all adds up to reality.

John



John,

Those are all valid points.

Who knows, you guys may be right and Moller may be just another circus
barker with nothing but tricks up his sleeve. On the other hand...there
was no shortage of naysyaers about the Wrights and Langley and Curtiss
and Lilienthal and Dumont and all the rest of the early innovators too.

I'd rather be an optimist when it comes to progress. I hope the Skycar
succeeds. Heck, I would love to have one. You could park the thing in
your garage, drive to your nearby helipad (local hospital) and take off
vertically. Heck for us farm lads, we could just take off from our back
yard. I'd call that pretty revolutionary.

As far as the Skycar being underpowered, I think that is mostly a
challenge in the vertical takeoff phase. A conventional light plane
would have no problem getting off the ground and climbing smartly with
even a fraction of the thrust those four ducted fans are producing.

And that's the real attraction for me. I think the idea of
rotary-powered ducted fans for personal planes has real promise. I'd
love to see a Cirrus-size plane that's rotary-fan powered. Given some
basic development, I believe this could prove more effective and
efficient than small turbines.

But nobody is working on this except Moller. Everybody is content to
just keep flying behind the old lousy piston engine, which is both heavy
and unreliable. So just on that basis alone, I say more power to the guy.

Regards,

Gordon.


They are working on it! It is called the V22 Osprey.

The reason nobody is working on a similar ducted fan design is:
it is not going to work!

There are no analogies with the Wright brothers because
the Wright brothers understood the Newtonian physics involved.

Paul Moller understands the physics but he is counting
on the fact that few other people do. If this was possible
the military would be all over it like a cheap suit.

This has all be discussed on here at length and ad nauseous.

The show stopper is the noise in your back yard.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.