What is the status of the adjustable pitch prop testing?

       Doc Custer
       Retired software engineer and sometime Audiologist
       Building RV9-A. Fuselage

       I don't know. Perry, did you get the prop back yet?
       --
       Paul Lamar ...No rotor no motor.



   Butch has the prop.

   I have the turbo engine accessories all installed. I just need to do a
   little wiring yet and then I will be ready to try starting it. Hopefully
   this will occur in the next week or so.

   Then I will need to borrow Leonard's RD1B 2.17 drive and Butch will have
   to send me the prop.

   If Dave Leonard can go ahead and send me the redrive I can get that
   installed. I will need the auto trans flexplate and I will have to plumb
   in the oil lines.
   Perry

   I think I might come up for the test. I'll be busy through
   Nov 7th or so after that I'll be free.

   Paul Lamar ...No rotor no motor.

Paul, if you are going up for the test run, you can just bring the drive
with you (as it will be heavy to ship.  Perry, will that work for you?
Just getting the PSRU at the last minute?

Perry,
Do you also need the rear counter-weight to go with the flex-plate?  I
have both series 4 and series 5.  Just let me know which you need.

PS.  Do you also want to borrow my starter, or should I remove it?

Dave Leonard


-Turbo Rotary RV-6 N4VY
My websites at:
http://members.aol.com/_ht_a/rotaryroster/index.html
http://members.aol.com/_ht_a/vp4skydoc/index.html
http://leonardiniraq.blogspot.com-


It is OK with me if it is OK with Perry.

Can you box it up for check on baggage?

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.