Doc,

    Please put me down for one of the 2 inch,

    Regards,
    Joe Graham

    --------------------------------------------------------------
    Doc the same plates will work for two inch or three inch
    all you need change is the slide. Your CDs are on the way.

    Paul Lamar
    ------------------------------------------------------------------

    An idea for making the cut-outs would be to make a templet and use a
    router (wood working) to cut the holes.  Obviously not the accuracy
    of NC, but do you need it?

    Joel

That will work Teflon is easy to cut.

Paul Lamar

Sounds like it is worth a try. Thanks for the idea.

Doc Custer
Retired software engineer and sometime Audiologist
Building RV9-A. Fuselage


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.