Subject: Ducted fan airplanes
From: Rotary Engine
Date: 10/21/2006, 8:10 PM
To: AA-me



The rotaries do have many attractive features.  Handling the extra 250 deg
of exhaust heat and the plumbing have always made me reluctant to take a
shot at it.  One idea I haven't given up on yet is a modified Taylor
Mini-Imp.  I've had the plans for years but have been waiting for someone to
demonstrate a successful aluminum rotary in the 90-120 hp range.  The
primary advantage of this bird is that it is already using a buried pusher
installation.

The gear already retracts.  There is room for 30 deg inlets
and the fan, driven by a short shaft.  The downside is that this all-metal
plane is labor intensive.  The current owner of the rights has made huge
strides in providing laser-cut sheet metal parts and the fiberglass
fairings.  But I still think its going to take at least 1200 hours to
reconfigure and assemble.  Plus a ground test rig for the engine/fan combo.
I think I've figured out how to build the wings differently while retaining
the planform and airfoil.  It should take about 2/3 of the hours out of
assembly.  Unfortunately, the Mini-Imps are not numerous and I've only seen
one for sale over the last four years.  Somebody beat me to it a few months
ago.

George Wright

Are you willing to burn 20% more fuel for the cosmetic
ducted fan? :)

Paul Lamr

I'm willing to have something fun to putz around in that should be safe
enough for a fairly low-time pilot.  My rear end gets tired after a couple
of hours anyway.  There is no question that running on the edge of
technology is fun, we all like a Lexus, but I'm ok with a Chevvie.  In all
seriousness, most sport planes aren't particularly justifiable economically.
We build em and fly em because we want to.  I'm not claiming a ducted fan
Mini-Imp would be a world beater.  But if it performed reasonably and
retained the majority of the handling characteristics of the original, it
would be a fun package.  As a single seater, I wouldn't have the burden of
someone else's safety on my conscience.  But whatta I know?
George W

Safety is another issue. Nothing about the ducted fan directly affects
the safety. They just add unnecessary drag, weight  and do nothing for
anything else. Perry Mick noticed no decrease in take off or climb performance
after he removed the duct but picked up 30 MPH for the same fuel
burn.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.