>
> Pretty good summary Gordon. I have not checked all your
> numbers but it looks good. You have certainly spent a
> lot of time thinking about it.
>
> One thing going against the duct is skin friction
> drag is prop. to the square of the velocity so if you have
> a high velocity duct exhaust you are paying a price.
>
> That is one reason the eff. of the duct is so bad.
>
> Paul Lamar ...No rotor no motor.
>
Gordon
It sounds like an interesting concept and the devil will be in the details.
Perhaps you have spoken to Monty about this as well? I think he was
thinking along the same path for his plane design. Paul's 1997 design
posted a few days ago had a unique way of diverting some of the thrust
through the radiators thereby killing two birds with one stone. If done well
then the 680 Hp. 26B engine would cool well and the expanding heat out the
exhaust would help to evacuate the duct. It will take years to get the duct
tested well so perhaps an all aluminum engine will be happening by then and
hence bringing your gross weight down further.
Doug Fir
Cooperstate bound
Paul,
I'm aware of the duct drag and I'm going to come back with something a
little more thought out on that shortly.
Doug,
I haven't been in touch with Monty since our last discussion about your
turbocompund project.
I also haven't given much thought yet to the issues you mentioned: fan
and duct configuration, cooling, exhaust etc. I will say quickly that
exhaust thrust from a turbocompound rotary engine at 25,000 feet could
be significant. Turboprop engine thrust accounts for about 15 percent of
total and I suspect we could be looking at something similar, if not
more. I will work on this a little too.
Each of these issues needs its own proper analysis. I'm just doing the
back of napkin stuff at this point.
Regards,
Gordon.
Exhaust thrust is small but constant with speed. If you are going
400 MPH it can amount to a measurable amount of HP.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.