Yes, you can get more thrust with multiple stages for a given installed
horsepower, but not as much as you'd think. I remember seeing some
numbers
on one well-designed (and ground tested!) fan system. The increase in
static thrust with a second state was 20%. But you had the weight
increase
and complexity of two stages. Most pro's design these things with a 20%
overspeed capacity. Based upon the fan laws, you can install more
hp and
drive the fan a bit faster and get more thrust. Its a trade-off on
space,
weight, of the second stage versus weight and increased fuel consumption
with the second alternative.
George W
George,
I understand the overspeeding concept, (for a turbofan), but in our
case we must face the fact that the power peak is at a particular RPM if
we were to use rotary power. Even a turbo engine has a point of maximum
efficiency. 20% is a significant increase in thrust. Running two fan
disks would probably be worth the effort in a non-continuous combustion
ICE powered effort.
Bill Jepson
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.