My guess is around 430 HP +/- 10 HP. A Teflon slide throttle
replacing the current butterfly might help to get it up to 450 HP.
Sponsored by our friends at Road & Track.
Thanks guys.
Driven by Jami Bach and Guy Cosmo. Stock off the shelf
carbon fiber racing chassis made in France. Over weight
mostly due to the gear box according to the team manager.
He also said it had RX8 rotors.. possible but I kind of doubt it.
Sounds a bit too Mazda PR to my ears. It has Racing Beat P-port
rotor housings and cast iron stock 3 rotor intermediate
housings.
Unfortunately it is not competitive because it is a low
buck compared to the high buck teams like the Penski Porsche and
Audi teams. The Penski Porsche's are turning 1:13 at Laguna
Seca and this car does about 1:19 or six seconds slower.
This is American Lemans series and is sanctioned by
IMSI. Not really car racing because IMSI adjust the cars
performance at will at anytime. In theory if you are too fast they
make you run an intake air restricter. No point in developing the car
just go to IMSI and whine and they will restrict your competitors
or increase the dia. of your restrictor....IN THEORY!. In reality
the potential for hanky panky is high. Money talks. Consequently
somebody at IMSI decides who wins and who loses.
The Porsche is a 32 valve 3.4 liter V8 out and out racing
engine with 480 HP at 11,500 RPM cost no object competing with
what is basically a luxury coupe, street car except p-ported, mostly
cast iron rotary. I would not be a bit surprised if the
Porsche engine cost over $100,000. The 3 rotor probably cost
less than $15,000.
Since there is a minimum weight for the class the high
power to weight ratio advantage of an all aluminum rotary can not
be exploited.
As far as I am concerned real car road racing ended in the early
1970's with the run what you brung Can Am. No rules top speak of.
Back in those days the little guy could win with brilliant
engineering.
That is why I am now into experimental airplanes.
Paul Lamar ...No rotor no motor.
To expand on this a bit more most professional car racing is a waste
of a car companies sponsor money as it does not demonstrate that
one brand of car is better than another. NASCAR is a classic
example where all cars are identical except they are painted
to look like Fords or Chevrolet's. The sanctioning bodies
assume the average spectator is too dumb to know the difference
between a race car and a street car. It is insulting the spectators
intelligence. If your car or engine is really better they will
merely handicap it to the point where it is no faster than
the competition. If I were running Mazda I would pull out of
IMSA racing all together like BMW is doing.
Mazda races a front drive NA Mazda six in the SCCA SPEED World
Challenge Touring Car Championship. It is in a battle with Acura.
Acura runs a stock intake manifold so Mazda is penalized with a
restrictor because they fabricate a manifold just for racing.
Which car is better? All cars must be the same minimum 2600 pound
weight so what good does clever chassis engineering have to do with
it? The lap times for these front drive cars are in
the 1 minute 39 second range which is slow by race car standards.
The problem with front engine, front drive cars is weight transfer.
When you hit the brakes 90% of the braking is done by the front
wheels. When you accelerate out of a slow speed corner traction
is lost because weight is transfered to the rear non driving
wheels. Real sports sedans like BMW, Mercedes and the RX8 have
rear drive. If I were Mazda I would forget it. In fact I would
forget any class of racing where one brand of car is raced
against another brand. You WILL NOT win.
If I were Mazda I would start another spec class for 300 HP P-port
Star Mazda type cars and let the excellent lap times and relatively
low cost, high durability and long life of the rotary
engine speak for it self. The racing would be so spectacular
TV coverage would follow.
Despite the rotary engine handicaps SCCA grass roots racers
using their own money love the rotary for these reasons. Mazda
needs to wake up to these facts.
Since they own a race track
Mazda could run a entry level school for drivers using
a restricted Star Mazda rotary powered car. Then drivers
showing talent could move up to the 200 HP Star Mazda class
and finally to the 300 HP Star Mazda class cars.
Stop wasting money and knocking your head against the wall Mazda.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.