>> Hi Paul,
    >>
    >>     Just to clarify, our aluminum side housings come with a 1/8"
    >> aluminum web at the bottom of a .060" deep side intake port
   shape (which
    >> is generally necessary to avoid contact between the rotor and side
    >> housings).  For peripheral ports, the web should be backed up with
    >> aluminum Devcon filler to support it.  For side intake, the web
   can be
    >> removed.
    >>
    >> Jim Mederer

Paul,
Since Jim  seems to be monitoring the newsletter I thought I might ask
the important question. Jim, if I show up on your door with cash do you
have aluminum side housings to sell? A second question, Jim I'm going to
run a 20B in an RV-10 and want to know if you make, or have any plans to
make, an aluminum intermediate housing? An all aluminum version of the
20B was calculated (by Paul I believe) to save about 57 pounds! Lastly
are your P-port housings based on the factory p-port casting or are they
modified 13B housings? Many thanks for any information,
Bill Jepson



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.