Subject: there has to be a better way
From: Rotary Engine
Date: 10/29/2006, 11:55 AM
To: AA-me



Paul

I want to put the stock tension bolts back in my motor but I don't want to make a mess squirting a bunch of silicone in the holes to keep them from vibrating. There has to be a better way. what about using heat shrink tubing? maybe I can build it up so the tension bolts fit snug in there respective holes.

Tony

Sounds like it is worth a try. Try a test sample. Heat it
in the oven to about 220 F and see what happens to the
heat shrink tubing. Silicone is good to 500 F.

-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.