It is not exactly departure but if you pull high positive G's
and the canard stalls first (as expected) the airplane
will turn sharply towards the ground.
>> Paul Lamar
Not sure what is meant by "high positive G's". But in my flight testing
(Cozy Mk-IV), flights in other canards, and reports from all other canard
pilots I know, there is never a "turn sharply towards the ground". In a
high degree bank angle if you just keep pulling back on the stick the canard
will eventually stall. At that point the nose drops a little, air speed is
gained and the canard regains lift, then airspeed is lost again because the
elevator is still deflected and the canard then re-stalls. This process just
keeps repeating itself. It's known as the "nose-bob". In accelerated stalls
(high angle turns) the "bobbing" is more accentuated than in straight and
level flight - where it is often so gentle it is almost not noticed. But the
porpoising at high bank angles is not that big a deal - certainly not enough
to depart from the existing attitude/angle or lose control of the airplane.
It's more like you are on one of those kiddy rides that used to grace the
front of supermarkets - you know - put in a quarter and bob up and down on
the horse for 2 minutes. :)
Regards,
Joe Hull
Redmond/Seattle WA, Cozy-Mazda Rotary 69hrs
High positive G TURNS. Sorry.
Like 90 degree bank angles.
There is a lift vector on the canard that has a vertical
component in a high G turn. If that lift vector is lost while
the rear is still maintained the CG being head of the now
horizontal tails will FORCE the nose of the airplane down.
Paul got it rolled out and almost pulled out in 500 feet but the
sink rate was so high it buried the tires in hard ground
and collapsed the fuselage.
In the Conner crash we had a pilot witness. That is exactly
what he described. I investigated the accident with the
permission of the FAA and made a report to them.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.