I?ve been running Castrol 20-50 in my 20B to this point (about 25 hours).  Now that it is about ?broken in?, I?m considering changing to synthetic.
Everyone has their favorite oil, but I?m thinking the Idemitsu racing oil;
?specifically engineered to meet the unique requirements of a rotary
engine?. http://www.idemitsu-usa.com/page_211.htm, would make sense.

It comes in 10-30 and 20-50.  Considering typical operation at high power,about 5000 rpm, and at temps of 180 -210; I?m thinking stay with 20-50.

I use the stock oil metering pump for pan oil to the seals.

Comments?

Al

That is what I use in my RX8. Mazda recommends 5 W 30 as I recall.
the lighter the weight the less friction and it cools better.
Mazdatrix stocks it.

Paul Lamar ...No rotor no motor.

My 2005 RX8 Shinka's manual says 5-20.

Scott Gettings

My mistake. Yes  5 W 20.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.