Here is the 3 inch travel unit.
The throttle cable bracket will need to be
shortened about 1.75 inches when I get the exact dimensions
for the throttle cable. There are two screw adjustments.
How far the 10-32 cable is screwed into the steel attach button
inserted into the Teflon and where the two 7/16 nuts
are positioned on the throttle cable anchor. (Not shown yet.)
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.