Paul,
Well that is very interesting the opening shape of the slide in that
slide-throttle is exactly as I suggested it should be, as it provides the
smallest possible opening at idle - therefore providing a better control at
idle.
It's gratifying to see one's ideas confirmed even if the idea has been
around for some considerable time - it would seem.
George ( down under)

"Well that is very interesting the opening shape of the slide in that
slide-throttle is exactly as I suggested it should be, as it provides the
smallest possible opening at idle - therefore providing a better control at
idle."


Can you document this claim? :) Perhaps I forgot you told use
about it.

Paul Lamar ...No rotor no motor.


08/16/2006 05:37 PM
Slide Throttle Rev. 12

Paul,
Their on the Video RHS of thumbnails.
The throttle plate seems to have concave opening ( as apposed to your
convex/ round slide openings - which gives a smaller initial/ idle opening.
Probably less sensitive at low RPM.
George (down under)

OK I found it. You are hereby credited with this invention.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.