> >>>> paul
    > >>>>
    > >>>> Just some pics of the motor preassembled. Everything is
   torqued down.
    > >>>> I'm going to safety wire everything. As you can see the
   tension bolts
    > >>>> where drilled as well. I have new titanium studs but I'm not
   sure if
    > >>>> I'm going to use them or not. I want to run it on the stand
   for a bit
    > >>>> and get it tuned before I start changing tension bolts.
    > >>>>
    > >>>> Tony
    > >>>
    > >>>
    > >>> Looks nice. Are you sure you have your safety wires right ?
    > >>>
    > >>> John
    > >>
    > >> Sorry, as I read on further I noticed someone else had
   mentioned your wire
    > >> orientation already. I get so excited when I see something
   like that and I
    > >> have to pipe up right away. I usually feel like a kid amongst
   his betters
    > >> and elders listening in on lofty discussions. Of course I am
   likely to learn
    > >> something listening to the intellectual giants on this list.
   Again that
    > >> engine looks great.
    > >>
    > >> John
    > >
    > >
    > > Hi Paul,
    > >
    > > I'm now back in Japan after a very rewarding trip to collect
   parts and ideas
    > > for my SeaWind.  These included the remote water pump from you,
   a used Bell
    > > 47 final 3:1 drive unit, and a pile of JB Weld.  No pictures of
   Tony's
    > > engine arrive in my mail box. Could you resend them to me please.
    > >
    > > Thanks
    > >
    > > Doug
    > >
    > >
    > > It is probably because the NSA monitors my email and their
    > > computers are bogged down :) If it is something they don't
    > > understand they some times take hours to forward the email.
    > > Somebody there is getting a real education on rotary
    > > engines. Keep up the good work whoever you are and
    > > buy an RX8 with all that money we are paying you.
    > >
    > > Paul Lamar ...No rotor no motor.
    >
    > Paul,
    >
    > Nope ,  No joy. My mail box is empty but only 4 Xs came through
   indicating
    > failed pictures.  Are they JPEGS?  This has happened a several
   times this
    > year.  N.S.A. or Home Security wouldn't be interested in rotary
   engines
    > since they aren't exactly classified material.  They may be
   interested, in a
    > American pilot with a counter culture last pen name though.
   Especially now
    > that I have in my possession six ounces of top secret James Bond
   Weld:)
    >
    >
    > Doug
    >
    >
    > I don't know. I think Tony is using one of those non standard
    > computers like a Mac or something weird like that :)
    >
    >
    > Paul Lamar


   Doug,

   Go get 'em here http://www.bob-white.com/doug/

   Bob W.

   --
   N93BD - Rotary Powered BD-4 - http://www.bob-white.com
   <http://www.bob-white.com>
   First engine start 1/7/06 - Special Airworthiness Certificate 10/1/06
   Cables for your rotary installation - http://www.roblinphoto.com/shop/




What the heck Paul!!?  I thought you were going to just email the
pictures, and not the links!!!   Jeez..  :)


Matt-

Bob beat me to it. I already published the jpgs at
least once. You want to see them again? They are not that
exciting :)