The reason for the light weight oils isnt so much cooling as it is gas
mileage. And it's not as big of a deal in a rotary as it is the piston
engines. I personally can not fathom running a 5 weight oil in any engine,
so I don't. I'll give up a little gas mileage.
Bob Mears
Supermarine spitfire
Yes - the trend to lighter weight oil is about fuel economy. The
anti-wear
performance standards have been strengthened to keep wear in check as the
viscosity is lowered.
Hard data Andy :) Compositions if you have them.
Paul Lamar
Roj, Paul - as vendor-neutral as humanly possible. :-)
Here's some background info on the trends to lighter viscosity oils.
One from Europe:
http://www.iantaylor.org.uk/papers/IMechEReview.pdf
One from Japan:
http://www.pecj.or.jp/english/report/gijutu-report/e-report/01M445e.pdf
And a view from the Americas (November Lubes-n-Greases magazine):
Page 1:
http://www.zamslube.com/documents/viscosity_1.jpg (88K jpeg)
Page 2:
http://www.zamslube.com/documents/viscosity_2.jpg (132K jpeg)
Page 3:
http://www.zamslube.com/documents/viscosity_3.jpg (108K jpeg)
Page 4:
http://www.zamslube.com/documents/viscosity_4.jpg (108K jpeg)
Page 5:
http://www.zamslube.com/documents/viscosity_5.jpg (62K jpeg)
I'm not suggesting this is where we need to be with our aircraft, but the
fluids can work very well in ground transportation. Part of the complex
balancing act is viscosity versus the anti-wear additive mix. Stronger
cushioning with viscosity lowers the demand on the anti-wear chemistry (the
stuff that coats the parts and creates a sacrificial layer). Moving to
lower viscosity forces use of stronger anti-wear chemistry.
Andy Hecker
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.