Subject: Throttle cable anchor bracket for slide throttle
From: Rotary Engine
Date: 11/8/2006, 9:50 AM
To: AA-me

OK Doc based on the dimensions Mark sent me
we can shorten it about 1.15 inches.
Move the engine forward an inch and now you
have about two inches of clearance.
You will still have 3 inches of slide travel.

The motor mount is always the last thing you
design anyway. You need to weigh all parts first
and mock up the entire engine first or do accurate
and scale 3D's.
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.