OK Doc based on the dimensions Mark sent me
we can shorten it about 1.15 inches.
Move the engine forward an inch and now you
have about two inches of clearance.
You will still have 3 inches of slide travel.
The motor mount is always the last thing you
design anyway. You need to weigh all parts first
and mock up the entire engine first or do accurate
and scale 3D's.
--
Paul Lamar ...No rotor no motor.
Is it possible to reverse the direction the slide throttle travels
with the use of a bell crank? Jerry
------------------------------
Sure but why would you want to unless it is a pusher?
In the case of the pusher just use a 180 degree bend
in the throttle cable up near the cockpit.
Pushing the throttle knob in opens it up increasing
the power. The last time I checked my 182 worked like that.
One of the safety features is the extreme simplicity
of the throttle control. It could be replace by a simple
steel rod if it came out of the instrument panel in
a convenient place.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.