Subject: Combination slied throttle and carburator
From: Rotary Engine
Date: 11/9/2006, 6:27 AM
To: AA-me




     This is a VERY simple system. No computer, no sensors, no
     floats, no venturi, no fuel injectors, no nothing. Just very
     low pressure fuel. The fuel orifice area simply increases with
     the air passage area increase. Bigger fuel hole bigger air hole.
     There is another simple series valve that controls leaning.
     Paul Lamar


Paul,
  FWIW I believe the Aero-Carb violates the Lectron patents, if they are
still active. The Lectron I worked with used a square slide like a slide
throttle, but were built on a single bore using a return spring and pull
cable.
Bill Jepson

Times up.
Here it is. Super simple. A series of progressively larger
feed holes in the Teflon slide communicating a with a fixed
larger fuel hole in the aluminum spacer.

Patent applied for :)
-- 
Paul Lamar ...No rotor no motor.

And mixture control?
Overlap between progressive holes could be challenging.
Leakage from the feed hole between the slide?

tol  (thinking out loud)
Terry Adams

Details like that will be worked out. My first guess is
the center to center distance of the metering holes will
be the same as the diameter of the feed hole.

A a spigot barrel valve that controls the over all fuel flow to the
system. Controlled with a lever and a off the shelf
push pull control cable just like your friendly Cessna.


Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.