> This is a VERY simple system. No computer, no sensors, no
> floats, no venturi, no fuel injectors, no nothing. Just very
> low pressure fuel. The fuel orifice area simply increases with
> the air passage area increase. Bigger fuel hole bigger air hole.
> There is another simple series valve that controls leaning.
> Paul Lamar
>
>
> Paul,
> FWIW I believe the Aero-Carb violates the Lectron patents, if
> they are
> still active. The Lectron I worked with used a square slide like a
> slidethrottle, but were built on a single bore using a return
> spring and pull
> cable.
> Bill Jepson
>
> Times up.
> Here it is. Super simple. A series of progressively larger
> feed holes in the Teflon slide communicating a with a fixed
> larger fuel hole in the aluminum spacer.
>
> Patent applied for :)
> --
> Paul Lamar ...No rotor no motor.
Very interesting! But wouldn't the fuel supply hole need to be oval
instead of round so that you'd access more than one slide hole as the
slide moves? Otherwise, it seems that you'd be decreasing fuel flow as
you move from one step to the next, until the hole were exactly aligned.
Scott Gettings
Details like that will be worked out. My first guess is
the center to center distance of the metering holes will
be the same as the diameter of the feed hole.
So two holes are in use most of the time.
--
Paul Lamar ...No rotor no motor.
Something like this for the fuel supply.
--
Blake C. Lewis
Good idea Blake. A sliding seal.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.