Subject: Combination slide throttle and carburator
From: Rotary Engine
Date: 11/11/2006, 9:20 PM
To: AA-me


The Cole-Palmer website
http://www.coleparmer.com/techinfo/ChemCompResults.asp

rates PVC w/ unleaded gasoline as
Fair -- Moderate Effect, not recommended
for continuous use. Softening, loss of strength,
swelling may occur.

rating for leaded gasoline:
B = Good -- Minor Effect, slight corrosion
or discoloration.

I use a PVC tube for unleaded gasoline transfer. After one year of use
it is discolored. It is a gravity flow installation, so I do not know
if any loss of strength has occurred.

Fellers: Didn't y'all notice the grin and very big grin part? As old foghorn
leghorn used to say "that was a joke, son/boy!" Sheesh, Doc, some folks just
don't got no sense of humor. <g> again. Seriously, I have run gasoline
through pvc in open marine environment (also gravity flow) and it did turn
it a yellowish orange but it never seemed to give any problems. I have also
run air pressure through it; but, I just don't think I would want to be more
than four or five feet off the ground and depend upon a pvc gas line or
fitting to keep me up there, even if I am one of them Tennessee country boy
types who will ask somebody to hold my beer and watch me, while I do most
anything.
jofarr, soddy tn


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.