Paul,
In regard to recent comments in regard to welding PP.
I recently inspected a couple of engines with welded-in PP - they were only
welded on the outside of the housing but the welding was quite extensive as
it fed a large bridged PP with a 4 point attachment flanges welded onto the
outside of the housing - no apparent distortion!
George ( down under)

Welding is totally unnecessary as JB Weld is good to 4000 psi
shear strength. No way will that tube comes loose short
of a jack hammer. Welding could warp the rotor housing ruining
it. Why risk it since you are using JB Weld to seal it anyway.

Do you have JB Weld down under? If so get some and try
it.

Paul Lamar ...No rotor no motor.

Paul,
I can't recall ever seeing it - like so may USA based items, we are in the
wilderness down here.
Makes things that much harder!!
George ( down under)


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.